Bosch External Fuel Pump 300lph

Bosch External Fuel Pump 300lph

Product Information

Brand New. Model 044. External Fuel Pump. Made in Czech Rep. 300lph @ 72.5psi. 100% Genuine!

Tips Buys Spare Part Car

For knowledge all, now this on market found at least five grade spare part.

1. Spare part original of country of production like Japan and UK. Usually his price is so expensive and just available of legal distributor. This goods very quality and guaranteed his resilience. Usually seller would give pledged against this goods.

2. Spare part original but made in Malaysia under manufacturer licence. His price is cheap slightly compared with goods '1' above. Guaranteed quality and usually is given guarantee by seller.

3. Spare part imitation which made in Malaysia or in its other country which price dirt cheap but quality and goods resilience cannot be determined.

4. Spare part recon. in recon in Malaysia. This goods malignant because it could cause terrible damage to car engine if we use its. His price such as goods '2' above and goods difference very difficult to be seen.

5. Spare part secondhand (shop cut). This goods may be said 100% original but used. His price may be said half of goods prices '1'. Dependent quality to types of goods and vehicle. Usually seller will give security limited for goods this.

How want know this goods this goods altogether. We will explain about goods difference 1, 3 and 4.

We take example, Timing belt. Timing belt original (1) if we hold, rubber tenderness belt its be able to we feel, we able goods tidiness see from print aspect number part and one way to test its, use our fingernail and try scrape number print part in belt. If can exit the number print then it is goods '3'. But if our nail want come off, it goods '1' or '2'. After using goods '3' long 3 month or more, usually we will listening to sound such as belt loose and usually mechanic would try to adjust. to timing belt have never we met goods '4'.

Be careful with engine sale of oil cheap because the oil is usually oil recycle or recon. Not oil only, plug, absorber, klutch plate, brake pad, oil filter, water filter. Engine oil would normally sticky depends on his viscosity rate but oil recon if we feel we will find out it less sticky and smelt like burnt thing.

To absorber, try to watch division steel shiny which entered into absorber. If absorber already damaged or oil seal its already leak, oil are going out through 4 pits around stem absorber that. But absorber recon, that hole already in close by screw or strand for use screw such as absorber adjustable. Clutch plate also stitch can see difference of colour and obsolescence between spike or rebate used to stick pad clutch with spike / original rebate. Unaccounted plug his difference but after using its sure we will know because plug recon, his life span shortly.

Here inexplicably with much further because of differences among the items 1, 2, 3 and 4 only could be seen if found two same goods type but different category.

Finally, make sure before buying spare part, ask seller either goods that are to be bought is goods 1, 2, 3 or 4. In proposal will purchase goods 1 or 2 although his price is expensive some but it be able to save we in the long run.

Arospeed Steering Quick Release

Product Information
Easy removal of steering wheel for racing and security purpose. Suitable with most aftermarket boss kit and steering wheels.

Price: MYR250.00

TO4E Hybrid Turbo T3/T4

Product Information

Brand New.
TO4E T3/T4 Hybrid Turbo Garrett Style
AR.50 Compressor
AR.63 Turbine
350-400bhp applications. 1.8L - 2.5L Engine Capacity.

Turbine made in China. Made by one of the biggest manufacturer for turbines. These turbos are not bad for it's price and it is also exported world wide. Europe is the biggest consumer for these products at the moment. So if your budget is limited and yet want to have a little kick for power, this is it.


Price: MYR1350.00

EBC Kevlar Brake Pads

EBC Brakes are produced in a modern ISO 9002 conforming factory in Bristol, England. The EBC programme ranges from "TYPE APPROVED" OEM replacement brake pads to upgrade Roadsport pads and full competition formulations offering a perfect selection for every type of brake pad requirement and type of motor vehicle.


Reg 90 Approved

This Kevlar based formulation is guaranteed to meet or exceed performance of all original equipment pads with strong progressive braking, reduction of dust on wheels and fantastic wear life. Type approved 'E' marked brake pads will soon near the Reg 90 logo in place or alongside TUV / KBA certification. Reg 90 approved pads are totally legal for highway use where a KBA was previously exclusively used and is accepted by insurance companies in place of a KBA.

BLITZ LM 6" Filter

Product Information

C 2 SUS Filter Core. 6" Inner Diameter. Steel Mesh Filter lasts as long as your vehicle.

*Filter adaptor sold separately.

Price: MYR420.00

NRG Magnetic Oil Drain Nut - Honda

Product Information

Magnetic Oil Drain Nut.
The in built magnet in the nut works by collecting small metal debris circulating in the engine oil, therefore reducing engine wear & tear.

Price: MYR39.90

GReddy Auto Turbo Timer Type II

Product Information

Brand New. Made in Japan. Separate control unit.

Features
- Speed
- Voltage
- 2 Auto or Manual Timer Settings
- Clock

Price: MYR390.00
In Stock: 2

TOMEI 270­° ProCams for RB26DETT

Product Information

For Nissan Skyline GTR RB26DETT
270° / 10.25mm lift. Intake and exhaust camshafts.

*Recommended use with racing valve springs, retainer and solid pivots. (sold separately)

ELEVO On/Off Switch with Cover

Product Information
Comes in three stylish colors with matching LEDs. Price per unit.

Price: MYR12.90

DURATECH Forged Conrods for Honda B16A/B

Product Information

Duratech's connecting rods have been tested on race engines to support 700hp. Each rod is manufactured adn designed to increase twisting strength and reliability. Duratech conrods comes with ARP bolts already installed and assembly lube.

Sold in 4pcs. Recommended with WISECO or JE Forged Pistons.

Price: MYR1800.00

5 caught dismantling stolen car

KUALA LUMPUR, Sun:

Five men who were engrossed in dismantling parts of a luxury car were arrested during a raid on a workshop in Sungai Lalang, Semenyih, near here on Friday.
Selangor police chief, Datuk Khalid Abu Bakar said during the raid, the men, aged between 25 and 46, including two Bangladeshi nationals, were preoccupied with dismantling the parts of a Toyota Fortune which was believed to have been stolen.

He said police believe the car parts would later be distributed to spare-part shops in the Klang Valley.

"We believe the group has been active over the past four months in the Klang Valley and they had established contacts with certain buyers in the area," he told reporters after presenting prizes for the Selangor Chief of Police Cup karate tournament here today.

Khalid also said police were in the midst of tracking down two men who are still at large, believed to be masterminds behind the operation. -- BERNAMA

Volk Racing TE37 15" 4H/114.3

Product Information

Used. Good condition. Without tyres. Year manufactured 1999

Model: VR TE37C / White (Price quoted for 4 units of rims)

Specs: (Made in Japan)

* 15"
* 7.0jj
* Off set +39
* Weight 4.2kg per rim

Price: MYR2300.00

Innovate LM-2 Digital Air Fuel Ratio Meter

Product Information

LM-2: Digital Air/Fuel Ratio Meter

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

* Patented “Direct Digital” Wideband Technology
* Wideband O2 Compatible with ALL fuel types
* Single or Dual Channel Version Available
* OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
* Log directly to SD card (included)
* Playback log data on screen and/or with powerful LogWorks software (included)
* Large high-contrast graphics LCD
* Built-in RPM converter (direct frequency or with optional inductive clamp)
* 4 fully-differential analog inputs
* 2 configurable linear analog outputs
* Positive lock connectors for all connections
* Innovate MTS serial IN and OUT
* USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included! P/N: 3806

Price: MYR2000.00

ZERONE Lighten Crank Pulley Mitsubishi 4G9x series

Product Information

Brand New.
Lighten Crank Pulley
Material: T6 Aluminum
Fits: Proton 1.6 / 1.8, Mitsubishi 4G92 DOHC, 4G93 Turbo DOHC, 4G91 DOHC.

Lighten Crank pulley benefits:
Free up hidden engine horse power. (up to 5% increase).
Better acceleration & Fuel Economy.

Price: MYR320.00
In Stock: 2

APEXi Racing Gloves (FIA Approved)

Product Information

Brand New. Genuine APEXi Product.

Size M

NOMEX Material. Very comfortable racing gloves.
Normal price RM700.00

Price: MYR700.00
In Stock: 1

KYB Adjustable Coilovers for Proton Wira/Satria/Gen2/Persona

Product Information
KYB RS PRO, engineered by KYB Japans technology, offers the best in driving pleasure. Precision, Responsiveness and Originality is the key to the success of KYB RS PRO performance suspension.

Performance

* Proven by Ralliart, TRD & others brand in its motorsports activities. Trusted name in performance technology.
* Co-efficient between the damper and spring provides superb handling capabilities.
* Assist in braking efficiency, ensuring safety.

Unique Features

* Replaceable cartridge for choice of driving preference: soft, medium or hard.
* Cost saving as you need to only purchase the cartridge to suit your driving style.
* Easy maintenance.
* Adjustable spring height - makes the vehicle sportier.
* Better ride.

Durability

* Made of high tensile steel for rigidity and toughness.
* Multi lip oil seal to disperse heat and resistant to high pressure.
* Prolong damper life and consistent in performance.
* Multi stage valving technology for quick response.
* Adaptable to any road conditions.
* Compatible and working in sync between the spring and oil seal to prevent friction for smoother movement.
* Original KYB damper oil to maintain viscosity even in high temperature.
* Nickel chrome interior and epoxy paint on the surface for protection and long lasting.

Price: MYR1850.00
In Stock: 2

APEXi AVC-R Electronic Boost Controller

Product Information

avcr2.jpg image by wiragsr avcr.jpg image by wiragsr

Brand New Unit. In box complete with harness, manual, solenoid, stand and hoses.

The AVC-R is a digital boost controller that allows the user to modify the boost pressure level on turbocharged vehicles. While there are many boost controllers on the market, none of the other includes as many features as the AVC-R, period. Despite all of the complex features included the unit, the AVC-R is flexible enough to be used by beginners. Entry level users need only to input a desired boost level and the AVC-R's trademark self learning CPU processor does the rest.

The AVC-R also uses a highly durable, fast action solenoid valve to physically control the boost . The valve movement (Boost Duty Cycle) can also be modified. Raising the duty cycle increases boost response, while lowering the duty cycle will slow boost response. This feature allows boost response adjustment for varying turbo sizes. Since larger turbos take longer to spool up ( bad low end response) the duty cycle should be raised under lower RPM's for better response. The opposite should be done for smaller turbo's ( excellent low - mid range response, but limited top end power.) A'PEXi engineers address this issue by including extra menus for RPM based boost control. Drag racers may want to utilize the Gear based boost control function. Aside from the basic functions above, the AVC-R has a Start Duty Setting (allows the boost to momentarily overshoot according to gear).

The AVC-R also includes a Scramble Boost function which allows the user to momentarily raise or lower the boost level at the push of a button. Raising the boost level is commonly used when an extra burst of power is needed (ex. entering a freeway). This feature can also be used in drag racing. The driver can set the main boost level to a low setting for maximum traction then, once full traction is achieved, the scramble boost can allow the vehicle to boost full power.

The AVC-R displays data in three different modes: Numerical, Analog, and Graph. Numerical Mode allows the user to monitor up to four different parameters in numbers and also shows peak hold values on demand. The Analog Mode displays up to two values in an easy to read meter style display. Peak Hold is also included in this function. The Graph Mode offers real time graph plotting with a Ghost map trace feature built in. The graph can replay movement up to 60 seconds.

CONCEPT:
Advanced electronic boost controller

CHARACTERISTICS:
Highly flexible boost control with new functions

Price: MYR2100.00

BLITZ Universal Muffler (Nur Spec)

Product Information

Brand New. Genuine BLITZ Nur Spec Universal Muffler.
Available in various sizes. 2.5" Inlet for NA or 3" Inlet for Turbo Charged Engines.
Short Body for Hatchback or Normal for Sedan. All models are with 115mm Tip.

Please state the desired inlet size and body type when placing order.

Price: MYR950.00

ELEVO VR4 Intercooler

Product Information

Brand New.
Nice polished finishing. Bar & Plate design offers better flow.
Size: 450mm(Core Size)x220mm(Height)x70mm(Thickness)
Outlet 2.5" (63mm)

Price: MYR450.00

Arospeed Adjustable Cam Gears for Mitsubishi EVO1-8

Product Information

Suitable for Mitsubishi Lancer Evolution 1-8, VR4 4G63. (Intake & Exhaust Cam Gear/Pulley) Sold in a pair.

Why use adjustable cam gear?
The New Arospeed Cam Gears Are Designed To Increase horsepower and torque without any cam changes, and are ideal for heavily modified engines. Made Out Of CNC-machined from 6061-T6 billet aluminum and Includes Grade-8, six-point hex bolts stand up to repeated adjustments and feature integral washer flange for greater load distribution. Our Adjustable Cam gears enable users to match cam timing with their vehicle's tuning state by advancing or retarding the cam profile in one-degree increments via laser-etched markings. Best used with performance cam-shafts.

Price: MYR520.00

Skunk2 Intake Manifold for B16A/B Series

Product Information

Skunk2 Racing’s Pro-Series Intake Manifold improves airflow thus increasing horsepower by as much as 8% over stock manifolds on stock engines and even more on modified or forced-induction engines. Skunk2 manifolds significantly increase horsepower between 3000-8800 rpm; the broadest powerband increase in the industry. Our new Pro-Series design features a 22% increase in power over our previous design. Engineered with a larger plenum and tapered runners, Skunk2 manifolds increase and accelerate airflow, and are designed to increase the effects of wave scavenging at the engine’s optimum operating RPM range providing a broad overall increase in usable power. Each runner entry is also modified to balance airflow between cylinders. Oversized throttle bodies can be used as a result of the modified IAC opening on the flange. Like OEM factory manifolds, Skunk2 manifolds are shell molded and CNC machined, to achieve superior strength, high-quality finish, and a precise fit. Each manifold is vacuum tested to ensure quality and leakfree operation. The Skunk2 Pro-Series manifold utilizes all stock sensors and auxiliaries for a simple bolt-on installation that delivers maximum power. Ideal for NA and Forced Induction

Skunk2 Has Been Leading the Sport Compact Car Industry with Cast Aluminum Manifolds Since 2000

* Increased Plenum and Runner Size
* Oversized Throttle Body Opening
* Made From High-Grade 356 Aluminum
* OEM Quality Shell Molded Casting
* Nitrous Mounting Bungs
* Skunk2 Acid-Etched Nameplate
* Broadest Usable Powerband
* Vacuum Tested To Ensure Quality
* Utilizes Stock Sensors 64mm Throttle Body Opening That Can Be Port Matched To 75mm
* Increased Plenum Volume
* 8” Tapered Runners For Maximum Torque and Power Increase

Price: MYR1100.00 MYR990.00

Stainless Steel BLITZ style Air Filter

Product Information
76mm inlet diameter for universal applications. Stainless steel micro mesh for superior filteration, performance and longevity.

Price: MYR65.00 MYR50.00

TRD Gearknob for Toyota VIOS Manual

Product Information

Brand new. Teflon Material. *Replica* Unit.

Available in Black or White.

Price: MYR65.00

Honda B16A Metal Head Gasket 1.1mm for Turbo

Product Information
1.1mm 3-layered metal head gasket. Suitable for B16A Turbo Charged application.