5 caught dismantling stolen car

KUALA LUMPUR, Sun:

Five men who were engrossed in dismantling parts of a luxury car were arrested during a raid on a workshop in Sungai Lalang, Semenyih, near here on Friday.
Selangor police chief, Datuk Khalid Abu Bakar said during the raid, the men, aged between 25 and 46, including two Bangladeshi nationals, were preoccupied with dismantling the parts of a Toyota Fortune which was believed to have been stolen.

He said police believe the car parts would later be distributed to spare-part shops in the Klang Valley.

"We believe the group has been active over the past four months in the Klang Valley and they had established contacts with certain buyers in the area," he told reporters after presenting prizes for the Selangor Chief of Police Cup karate tournament here today.

Khalid also said police were in the midst of tracking down two men who are still at large, believed to be masterminds behind the operation. -- BERNAMA

Volk Racing TE37 15" 4H/114.3

Product Information

Used. Good condition. Without tyres. Year manufactured 1999

Model: VR TE37C / White (Price quoted for 4 units of rims)

Specs: (Made in Japan)

* 15"
* 7.0jj
* Off set +39
* Weight 4.2kg per rim

Price: MYR2300.00

Innovate LM-2 Digital Air Fuel Ratio Meter

Product Information

LM-2: Digital Air/Fuel Ratio Meter

The LM-2 combines an air/fuel ratio meter, a full-function 32-channel datalogger, and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller, race carb, aftermarket ECU, ODB-II tuning software, or a flash/chip programmer, an LM-2 is the tool you need to dial in maximum HP. The meter’s digital signal processing technology provides data on exactly how rich or lean an engine is running at any load. The LM-2’s self-calibrating circuitry also compensates for changes in temperature, altitude, and sensor condition.

* Patented “Direct Digital” Wideband Technology
* Wideband O2 Compatible with ALL fuel types
* Single or Dual Channel Version Available
* OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
* Log directly to SD card (included)
* Playback log data on screen and/or with powerful LogWorks software (included)
* Large high-contrast graphics LCD
* Built-in RPM converter (direct frequency or with optional inductive clamp)
* 4 fully-differential analog inputs
* 2 configurable linear analog outputs
* Positive lock connectors for all connections
* Innovate MTS serial IN and OUT
* USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges, dyno computers, ECUs, piggyback controllers, and other devices with analog inputs. Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

The LM-2 Kit (Single Wideband O2) includes the LM-2 meter, Bosch wide-band oxygen sensor, 8 ft sensor cable, cigarette-lighter power adapter, analog in/out cable, ODB-II/CAN interface cable, SD memory card, USB cable for PC connection, weld-in bung and plug, LogWorks software CD, and quick-start guide. Carrying Case also included! P/N: 3806

Price: MYR2000.00

ZERONE Lighten Crank Pulley Mitsubishi 4G9x series

Product Information

Brand New.
Lighten Crank Pulley
Material: T6 Aluminum
Fits: Proton 1.6 / 1.8, Mitsubishi 4G92 DOHC, 4G93 Turbo DOHC, 4G91 DOHC.

Lighten Crank pulley benefits:
Free up hidden engine horse power. (up to 5% increase).
Better acceleration & Fuel Economy.

Price: MYR320.00
In Stock: 2

APEXi Racing Gloves (FIA Approved)

Product Information

Brand New. Genuine APEXi Product.

Size M

NOMEX Material. Very comfortable racing gloves.
Normal price RM700.00

Price: MYR700.00
In Stock: 1

KYB Adjustable Coilovers for Proton Wira/Satria/Gen2/Persona

Product Information
KYB RS PRO, engineered by KYB Japans technology, offers the best in driving pleasure. Precision, Responsiveness and Originality is the key to the success of KYB RS PRO performance suspension.

Performance

* Proven by Ralliart, TRD & others brand in its motorsports activities. Trusted name in performance technology.
* Co-efficient between the damper and spring provides superb handling capabilities.
* Assist in braking efficiency, ensuring safety.

Unique Features

* Replaceable cartridge for choice of driving preference: soft, medium or hard.
* Cost saving as you need to only purchase the cartridge to suit your driving style.
* Easy maintenance.
* Adjustable spring height - makes the vehicle sportier.
* Better ride.

Durability

* Made of high tensile steel for rigidity and toughness.
* Multi lip oil seal to disperse heat and resistant to high pressure.
* Prolong damper life and consistent in performance.
* Multi stage valving technology for quick response.
* Adaptable to any road conditions.
* Compatible and working in sync between the spring and oil seal to prevent friction for smoother movement.
* Original KYB damper oil to maintain viscosity even in high temperature.
* Nickel chrome interior and epoxy paint on the surface for protection and long lasting.

Price: MYR1850.00
In Stock: 2

APEXi AVC-R Electronic Boost Controller

Product Information

avcr2.jpg image by wiragsr avcr.jpg image by wiragsr

Brand New Unit. In box complete with harness, manual, solenoid, stand and hoses.

The AVC-R is a digital boost controller that allows the user to modify the boost pressure level on turbocharged vehicles. While there are many boost controllers on the market, none of the other includes as many features as the AVC-R, period. Despite all of the complex features included the unit, the AVC-R is flexible enough to be used by beginners. Entry level users need only to input a desired boost level and the AVC-R's trademark self learning CPU processor does the rest.

The AVC-R also uses a highly durable, fast action solenoid valve to physically control the boost . The valve movement (Boost Duty Cycle) can also be modified. Raising the duty cycle increases boost response, while lowering the duty cycle will slow boost response. This feature allows boost response adjustment for varying turbo sizes. Since larger turbos take longer to spool up ( bad low end response) the duty cycle should be raised under lower RPM's for better response. The opposite should be done for smaller turbo's ( excellent low - mid range response, but limited top end power.) A'PEXi engineers address this issue by including extra menus for RPM based boost control. Drag racers may want to utilize the Gear based boost control function. Aside from the basic functions above, the AVC-R has a Start Duty Setting (allows the boost to momentarily overshoot according to gear).

The AVC-R also includes a Scramble Boost function which allows the user to momentarily raise or lower the boost level at the push of a button. Raising the boost level is commonly used when an extra burst of power is needed (ex. entering a freeway). This feature can also be used in drag racing. The driver can set the main boost level to a low setting for maximum traction then, once full traction is achieved, the scramble boost can allow the vehicle to boost full power.

The AVC-R displays data in three different modes: Numerical, Analog, and Graph. Numerical Mode allows the user to monitor up to four different parameters in numbers and also shows peak hold values on demand. The Analog Mode displays up to two values in an easy to read meter style display. Peak Hold is also included in this function. The Graph Mode offers real time graph plotting with a Ghost map trace feature built in. The graph can replay movement up to 60 seconds.

CONCEPT:
Advanced electronic boost controller

CHARACTERISTICS:
Highly flexible boost control with new functions

Price: MYR2100.00

BLITZ Universal Muffler (Nur Spec)

Product Information

Brand New. Genuine BLITZ Nur Spec Universal Muffler.
Available in various sizes. 2.5" Inlet for NA or 3" Inlet for Turbo Charged Engines.
Short Body for Hatchback or Normal for Sedan. All models are with 115mm Tip.

Please state the desired inlet size and body type when placing order.

Price: MYR950.00

ELEVO VR4 Intercooler

Product Information

Brand New.
Nice polished finishing. Bar & Plate design offers better flow.
Size: 450mm(Core Size)x220mm(Height)x70mm(Thickness)
Outlet 2.5" (63mm)

Price: MYR450.00

Arospeed Adjustable Cam Gears for Mitsubishi EVO1-8

Product Information

Suitable for Mitsubishi Lancer Evolution 1-8, VR4 4G63. (Intake & Exhaust Cam Gear/Pulley) Sold in a pair.

Why use adjustable cam gear?
The New Arospeed Cam Gears Are Designed To Increase horsepower and torque without any cam changes, and are ideal for heavily modified engines. Made Out Of CNC-machined from 6061-T6 billet aluminum and Includes Grade-8, six-point hex bolts stand up to repeated adjustments and feature integral washer flange for greater load distribution. Our Adjustable Cam gears enable users to match cam timing with their vehicle's tuning state by advancing or retarding the cam profile in one-degree increments via laser-etched markings. Best used with performance cam-shafts.

Price: MYR520.00

Skunk2 Intake Manifold for B16A/B Series

Product Information

Skunk2 Racing’s Pro-Series Intake Manifold improves airflow thus increasing horsepower by as much as 8% over stock manifolds on stock engines and even more on modified or forced-induction engines. Skunk2 manifolds significantly increase horsepower between 3000-8800 rpm; the broadest powerband increase in the industry. Our new Pro-Series design features a 22% increase in power over our previous design. Engineered with a larger plenum and tapered runners, Skunk2 manifolds increase and accelerate airflow, and are designed to increase the effects of wave scavenging at the engine’s optimum operating RPM range providing a broad overall increase in usable power. Each runner entry is also modified to balance airflow between cylinders. Oversized throttle bodies can be used as a result of the modified IAC opening on the flange. Like OEM factory manifolds, Skunk2 manifolds are shell molded and CNC machined, to achieve superior strength, high-quality finish, and a precise fit. Each manifold is vacuum tested to ensure quality and leakfree operation. The Skunk2 Pro-Series manifold utilizes all stock sensors and auxiliaries for a simple bolt-on installation that delivers maximum power. Ideal for NA and Forced Induction

Skunk2 Has Been Leading the Sport Compact Car Industry with Cast Aluminum Manifolds Since 2000

* Increased Plenum and Runner Size
* Oversized Throttle Body Opening
* Made From High-Grade 356 Aluminum
* OEM Quality Shell Molded Casting
* Nitrous Mounting Bungs
* Skunk2 Acid-Etched Nameplate
* Broadest Usable Powerband
* Vacuum Tested To Ensure Quality
* Utilizes Stock Sensors 64mm Throttle Body Opening That Can Be Port Matched To 75mm
* Increased Plenum Volume
* 8” Tapered Runners For Maximum Torque and Power Increase

Price: MYR1100.00 MYR990.00

Stainless Steel BLITZ style Air Filter

Product Information
76mm inlet diameter for universal applications. Stainless steel micro mesh for superior filteration, performance and longevity.

Price: MYR65.00 MYR50.00

TRD Gearknob for Toyota VIOS Manual

Product Information

Brand new. Teflon Material. *Replica* Unit.

Available in Black or White.

Price: MYR65.00

Honda B16A Metal Head Gasket 1.1mm for Turbo

Product Information
1.1mm 3-layered metal head gasket. Suitable for B16A Turbo Charged application.